MIL-SPEC
Showing all 17 results
-
BRAYCO 300
Castrol Brayco™ 300 is a blend of highly refined petroleum oil with suitable additives which provide corrosion prevention, oxidation resistance, and freedom from galvanic corrosion in brass-steel bimetallic systems. The viscosity is similar to a light machine oil. Brayco 300 is a water displacing oil for general purpose applications at low and medium + Read MoreProduct Data Sheet
Product Safety Data Sheet
-
BRAYCO 363
Castrol Brayco™ 363 is a highly refined blend of petroleum base stock and additives, which provide excellent resistance to oxidation, protection against rusting, and limits galvanic corrosion. + Read MoreProduct Data Sheet
Product Safety Data Sheet
-
BRAYCO 460
Brayco 460 is a mineral oil based jet lubricating engine oil approved against MIL-PRF-6081D Grade 1010. Brayco 460 is designed for older jet engines and other high speed turbines that require this specification.+ Read MoreProduct Data Sheet
Product Safety Data Sheet
-
BRAYCO 589
Brayco 589 is a corrosion preventative oil designed for gas turbines using a synthetic lubricating oil. 589 is designed for turbo prop and turbo jet engines using a MIL-PRF-7808 lubricating oil.+ Read MoreProduct Data Sheet
Product Safety Data Sheet
-
BRAYCO 599
Castrol Brayco™ 599 is a specially designed synthetic base, dark amber, rust preventative concentrate. Brayco 599 is designed for use as an additive for turbine engines and helicopter transmissions which use MILPRF-23699 lubricating oil. Brayco 599 should be added to the oil sump immediately after an oil change when the equipment is intended to be pla+ Read MoreProduct Data Sheet
Product Safety Data Sheet
-
BRAYCO 885
Castrol Brayco™ 885 is a diester base synthetic oil with additives which impart corrosion protection, minimize galvanic corrosion, inhibit oxidation, and reduce foaming tendencies. It has exceptionally low volatility and good viscosity temperature characteristics. Brayco 885 is designed to operate over the temperature range of -65ºF to 250ºF (-54º+ Read MoreProduct Data Sheet
Product Safety Data Sheet
-
BRAYCO 922
Brayco 922 is a special cut Stoddard solvent calibrating fluid that meets MIL-PRF-7024E, Type II. 922 is designed for the calibration of fluid system components for aircraft gas turbines and reciprocating engines.+ Read MoreProduct Data Sheet
Product Safety Data Sheet
-
BRAYCO MICRONIC 756
Bracyo 756 is a low viscosity hydraulic fluid for aircraft, missile and ordinance use. 756 is approved to MIL-PRF-5606G and is intended to be used in auto-pilot, brakes, flap controls and other servo-controlled systems. 756 is dyed red for easy identification and is excellent for low temperature environments.+ Read MoreProduct Data Sheet
Product Safety Data Sheet
-
BRAYCO MICRONIC 783
Bracyo Micronic 783 is a low viscosity hydraulic fluid for aircraft, missile and ordinance use. 783 is approved to MIL-PRF-6083F. 783 is dyed red for easy identification and is excellent for low temperature environments.+ Read MoreProduct Data Sheet
Product Safety Data Sheet
-
BRAYCO MICRONIC 881
Brayco Micronic 881 is a synthetic/hydrocarbon low viscosity, fire-resistant hydraulic fluid for aircraft, missile and industrial use. Micronic 881 is approved to MIL-PRF-87257A. Micronic 881is dyed red for easy identification and is excellent for low temperature environments.+ Read MoreProduct Data Sheet
Product Safety Data Sheet
-
BRAYCO MICRONIC 882
Brayco Micronic 882 is a synthetic low viscosity, fire-resistant hydraulic fluid for aircraft, missile and industrial use. Micronic 882 is approved to MIL-PRF-83282D, Amd 1.+ Read MoreProduct Data Sheet
Product Safety Data Sheet
-
BRAYCO MICRONIC 883
Brayco Micronic 883 is a synthetic low viscosity, fire-resistant hydraulic fluid for aircraft, missile and industrial use. Micronic 883 is approved to MIL-PRF-46170C, Type I (straw) and Type II (red). Micronic 883 is designed as a direct replacement for MIL-PRF-6083 when a full synthetic is required.+ Read MoreProduct Data Sheet
Product Safety Data Sheet
-
BRAYCO MICRONIC 889
Castrol Brayco™ Micronic 889 is a clear and bright, synthesized hydrocarbon based, heat transfer fluid and dielectric coolant. Brayco Micronic 889 is designed for use in electrical/electronic cooling of ground based and airborne closed loop systems. It offers high specific heat in comparison to other hydrocarbons, esters and silicone fluids. + Read MoreProduct Data Sheet
Product Safety Data Sheet
-
BRAYCOTE 194
Castrol Braycote™ 194 is a dark brown, liquid corrosion preventive compound intended for indoor exposure. It is a solvent cutback material designed for cold application, and dries in approximately two hours, leaving a firm, amber, transparent film that will not flow below 175°F (80°C). + Read MoreProduct Data Sheet
Product Safety Data Sheet
-
BRAYCOTE 248
Braycote 248 is designed to protect machined, unpainted metal surfaces from the effects of indoor or shed exposure for periods of six months or more. It is especially suitable for the preservation of anti-friction bearings in storage or shipment. + Read MoreProduct Data Sheet
Product Safety Data Sheet
-
BRAYCOTE 3214
Braycote 3214 is a multi-purpose, full synthetic grease formulated to meet MIL-PRF-32014. 3214 is intended for use in a variety of aircraft applications including landing gear assemblies and bearings, flight controls, flap/slat systems and gear applications where water resistance and corrosion protection are required.+ Read MoreProduct Data Sheet
Product Safety Data Sheet
-
BRAYCOTE 610
Castrol Braycote™ 610 is an advanced lithium-complex thickened, amber-colored multi-purpose NLGI Grade 2 grease. This product is composed primarily of synthetic hydrocarbon base stocks, gelling agents, anti-oxidants and corrosion inhibiting additives. + Read MoreProduct Data Sheet
Product Safety Data Sheet