Castrol
Showing 25–48 of 193 results
-
BRAYCO 599
Castrol Brayco™ 599 is a specially designed synthetic base, dark amber, rust preventative concentrate. Brayco 599 is designed for use as an additive for turbine engines and helicopter transmissions which use MILPRF-23699 lubricating oil. Brayco 599 should be added to the oil sump immediately after an oil change when the equipment is intended to be pla+ Read MoreProduct Data Sheet
Product Safety Data Sheet
-
BRAYCO 717
Castrol Brayco™ 717 is a straw-colored, medium viscosity hydraulic fluid. It is a blend of highly refined petroleum basestocks and additives, which provide resistance to oxidation and corrosion, anti-wear properties and a high viscosity index. + Read MoreProduct Data Sheet
Product Safety Data Sheet
-
BRAYCO 785
Castrol Brayco™ 785 is a petroleum-based preservative and break-in oil that can be used to protect gas turbines during shipping, storage, and prolonged shut-down periods. Brayco 785 was developed with the cooperation of a major manufacturer of gas turbine engines. While this product may also be used as a break-in oil, it is not meant for regular servi+ Read MoreProduct Data Sheet
Product Safety Data Sheet
-
BRAYCO 795
Bracyo 795 is a low viscosity hydraulic fluid designed for aircraft clutch and brake devices. 795 is formulated with special additives to assist in providing quiet operation.+ Read MoreProduct Data Sheet
Product Safety Data Sheet
-
BRAYCO 885
Castrol Brayco™ 885 is a diester base synthetic oil with additives which impart corrosion protection, minimize galvanic corrosion, inhibit oxidation, and reduce foaming tendencies. It has exceptionally low volatility and good viscosity temperature characteristics. Brayco 885 is designed to operate over the temperature range of -65ºF to 250ºF (-54º+ Read MoreProduct Data Sheet
Product Safety Data Sheet
-
BRAYCO 885
Castrol Brayco™ 885 is a diester base synthetic oil with additives which impart corrosion protection, minimize galvanic corrosion, inhibit oxidation, and reduce foaming tendencies. It has exceptionally low volatility and good viscosity temperature characteristics. Brayco 885 is designed to operate over the temperature range of -65ºF to 250ºF (-54º+ Read MoreProduct Data Sheet
Product Safety Data Sheet
-
BRAYCO 922
Brayco 922 is a special cut Stoddard solvent calibrating fluid that meets MIL-PRF-7024E, Type II. 922 is designed for the calibration of fluid system components for aircraft gas turbines and reciprocating engines.+ Read MoreProduct Data Sheet
Product Safety Data Sheet
-
BRAYCO MICRONIC 756
Bracyo 756 is a low viscosity hydraulic fluid for aircraft, missile and ordinance use. 756 is approved to MIL-PRF-5606G and is intended to be used in auto-pilot, brakes, flap controls and other servo-controlled systems. 756 is dyed red for easy identification and is excellent for low temperature environments.+ Read MoreProduct Data Sheet
Product Safety Data Sheet
-
BRAYCO MICRONIC 776RP
Bracyo 776RP is a medium viscosity, petroleum-based hydraulic fluid. 776RP is intended to be used in micro-hydraulic systems, robotics and rail car control systems. 776RP meets the rigid cleanliness requirements for CNCÛªs and robots..+ Read MoreProduct Data Sheet
Product Safety Data Sheet
-
BRAYCO MICRONIC 783
Bracyo Micronic 783 is a low viscosity hydraulic fluid for aircraft, missile and ordinance use. 783 is approved to MIL-PRF-6083F. 783 is dyed red for easy identification and is excellent for low temperature environments.+ Read MoreProduct Data Sheet
Product Safety Data Sheet
-
BRAYCO MICRONIC 881
Brayco Micronic 881 is a synthetic/hydrocarbon low viscosity, fire-resistant hydraulic fluid for aircraft, missile and industrial use. Micronic 881 is approved to MIL-PRF-87257A. Micronic 881is dyed red for easy identification and is excellent for low temperature environments.+ Read MoreProduct Data Sheet
Product Safety Data Sheet
-
BRAYCO MICRONIC 882
Brayco Micronic 882 is a synthetic low viscosity, fire-resistant hydraulic fluid for aircraft, missile and industrial use. Micronic 882 is approved to MIL-PRF-83282D, Amd 1.+ Read MoreProduct Data Sheet
Product Safety Data Sheet
-
BRAYCO MICRONIC 883
Brayco Micronic 883 is a synthetic low viscosity, fire-resistant hydraulic fluid for aircraft, missile and industrial use. Micronic 883 is approved to MIL-PRF-46170C, Type I (straw) and Type II (red). Micronic 883 is designed as a direct replacement for MIL-PRF-6083 when a full synthetic is required.+ Read MoreProduct Data Sheet
Product Safety Data Sheet
-
BRAYCO MICRONIC 889
Castrol Brayco™ Micronic 889 is a clear and bright, synthesized hydrocarbon based, heat transfer fluid and dielectric coolant. Brayco Micronic 889 is designed for use in electrical/electronic cooling of ground based and airborne closed loop systems. It offers high specific heat in comparison to other hydrocarbons, esters and silicone fluids. + Read MoreProduct Data Sheet
Product Safety Data Sheet
-
BRAYCO MICRONIC 889
Castrol Brayco™ Micronic 889 is a clear and bright, synthesized hydrocarbon based, heat transfer fluid and dielectric coolant. Brayco Micronic 889 is designed for use in electrical/electronic cooling of ground based and airborne closed loop systems. It offers high specific heat in comparison to other hydrocarbons, esters and silicone fluids. + Read MoreProduct Data Sheet
Product Safety Data Sheet
-
BRAYCOTE 194
Castrol Braycote™ 194 is a dark brown, liquid corrosion preventive compound intended for indoor exposure. It is a solvent cutback material designed for cold application, and dries in approximately two hours, leaving a firm, amber, transparent film that will not flow below 175°F (80°C). + Read MoreProduct Data Sheet
Product Safety Data Sheet
-
BRAYCOTE 194
Castrol Braycote™ 194 is a dark brown, liquid corrosion preventive compound intended for indoor exposure. It is a solvent cutback material designed for cold application, and dries in approximately two hours, leaving a firm, amber, transparent film that will not flow below 175°F (80°C). + Read MoreProduct Data Sheet
Product Safety Data Sheet
-
BRAYCOTE 236
Castrol Braycote™ 236 is a colorless, white grease-like technical grade petrolatum. It forms a soft, translucent, flexible coating on parts to which it is applied, and is readily removed with solvent or by steam cleaning processes. + Read MoreProduct Data Sheet
Product Safety Data Sheet
-
BRAYCOTE 248
Braycote 248 is designed to protect machined, unpainted metal surfaces from the effects of indoor or shed exposure for periods of six months or more. It is especially suitable for the preservation of anti-friction bearings in storage or shipment. + Read MoreProduct Data Sheet
Product Safety Data Sheet
-
BRAYCOTE 248
Braycote 248 is designed to protect machined, unpainted metal surfaces from the effects of indoor or shed exposure for periods of six months or more. It is especially suitable for the preservation of anti-friction bearings in storage or shipment. + Read MoreProduct Data Sheet
Product Safety Data Sheet
-
BRAYCOTE 3214
Braycote 3214 is a multi-purpose, full synthetic grease formulated to meet MIL-PRF-32014. 3214 is intended for use in a variety of aircraft applications including landing gear assemblies and bearings, flight controls, flap/slat systems and gear applications where water resistance and corrosion protection are required.+ Read MoreProduct Data Sheet
Product Safety Data Sheet
-
BRAYCOTE 444
Castrol Braycote™ 444 (previously called Aeroplex™ 444) is a hybrid synthetic, lithium complex NLGI Grade 2 grease. It contains proprietary Castrol additives and offers excellent low temperature properties. Braycote 444 has enhanced antiwear, oil separation, corrosion resistance, and low temperature torque characteristics. + Read MoreProduct Data Sheet
Product Safety Data Sheet
-
BRAYCOTE 610
Castrol Braycote™ 610 is an advanced lithium-complex thickened, amber-colored multi-purpose NLGI Grade 2 grease. This product is composed primarily of synthetic hydrocarbon base stocks, gelling agents, anti-oxidants and corrosion inhibiting additives. + Read MoreProduct Data Sheet
Product Safety Data Sheet
-
BRAYCOTE 610
Castrol Braycote™ 610 is an advanced lithium-complex thickened, amber-colored multi-purpose NLGI Grade 2 grease. This product is composed primarily of synthetic hydrocarbon base stocks, gelling agents, anti-oxidants and corrosion inhibiting additives. + Read MoreProduct Data Sheet
Product Safety Data Sheet